peperonity.net
Welcome, guest. You are not logged in.
Log in or join for free!
 
Stay logged in
Forgot login details?

Login
Stay logged in

For free!
Get started!

Text page


siemens - Newest pictures
donlazar89.peperonity.net

SIEMENS CODES

Mobile phone secrets, codes and technical
information for Siemens Mobile Phone.
All Siemens Phones: Service Provider
Unlock: *#0003*(secret code 8 digits)#
Siemens S25/C25
SP unlock *#0003*(secret code 8 digits)#
Show IMEI code: * # 06 #
Resets language to automatic selection : *
# 0000 # then Green button
Pin Out
Data Cable schematics
Phone's connector pin-out:
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Siemens S1/S3/S3 Com
To view the software date and else with
S3 com, S4, S4Power, Sony cmdx 1000e
press with SIM removed *#06# and left
softkey.
To view some other stuff with S4Power,
Sony cmdx 1000e press with SIM removed
*#06# and left softkey twice.
To view the software date with S3 com, S4,
S4Power, Sony cmdx 1000e press with SIM
installed menu 98 and left softkey twice.
ACTIVATE MONITOR MODE
Siemens S1/S3
Menu, 9 (Phone Options), 7 (Phone Status),
Left Display Button (left MENU key),
5553756, Hang-Up Button (Red Handset
key)
Siemens S3 COM/S4
Menu, 9 (Phone Options), 7 (Phone Status -
8 on Some), Left Display Button (left MENU
key), 7684666, Hang-Up Button (Red
Handset key)
Note: Now Monitor should appear at the
bottom of the Network Options menu.
MONITOR MODE
Pressing the right Display Button when in
monitor mode will toggle into 1 and 2
modes
Pressing the right Display Button when in
monitor mode will show a list of the six
cells with the strongest signals.
Test Mode Indicators: (* = only available
when call in progress )
CH Channel Number
RX Signal Strength (dB)
N NCC (Colour Code)
B BCC (Colour Code)
CI Cell ID (in Hex)
C1+ How long before phone does forced
hand over. (see RX and RXAM)
LAI Location Area Identity. Display Network
ID code (42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Receive signal strength cut-off point
TS* Time Slot Number
TA* Timing Advance. Distance from tower
in Km X 2
PL* Power Level
POWER table
PL: 5 6 7 8 9 10 11 12 13 14 15
dB: 33 31 29 27 25 23 21 19 17 15 13
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02
LF* C1 value with continuous transmission
from tower
LS* C1 Value with discontinuous
transmission from tower
QF* Bit Error Rate with continuous
transmission from tower
QS* Bit Error Rate with discontinuous
transmission from tower
BER (bit error rate) table
QF/QS register: 0 1 2 3 4 5 6 7
% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8
25.6
Siemens S1/S3
Here's a trick to play Tetris, also known as
Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the
telephone has logged in to the your GSM
net do the following steps.
1: Choose F 9 (function settings)
2: Choose send own number and push the
right button for choose.
3: Push 9
USE 2 as < and 8 as > , rotate the klotz
with 5 and drop with 4.
[I have just heard from one of the
programmers of the phone that Tetris was
in the phone during development, but it
was removed before it was produced.
Apparently someone has the patent on
games in mobile phones and Siemens
didn't want to pay the licensing fees. It
was either in Menu F-9-9 or it's not there
at all.]
Siemens S3 Comfort
MONITOR MODE
The Siemens S3 Com series have a Monitor
mode that can be activated directly from
the standard user keypad. In order to
activate this mode, you must enter the
special access code currently programmed
into the phone.
TO ACTIVATE MONITOR MODE:
Turn the phone on.
Enter the PIN access code on press OK.
(Only if is enabled).
Press Menu. (Left top button).
Press 9. (Phone Options).
Press 8. (Phone Status) (May be button 7 in
some phones).
You may see your IMEI Number
Left Display Button (Top left MENU key).
7684666
Hang-Up Button. (Red Handset key).
Note: Monitor should appear now at the
bottom of the Network Options menu.
MONITOR MODE
Pressing the right Display Button when in
monitor mode will toggle into 1 and 2
modes
Siemens S4/S4 Power
In phonebook under "Own Phone No."
enter +12022243121 (which is the
number to the White House) and you'll get
a greeting from the people who
programmed the phone.
MONITOR MODE
The Siemens S4 series have a Monitor
mode that can be activated directly from
the standard user keypad. In order to
activate this mode, you must enter the
special access code currently programmed
into the phone.
TO ACTIVATE MONITOR MODE:
Menu, 9 (Phone Options), 7 (Phone Status),
Left Display Button (left MENU key),
7684666, Hang-Up Button (Red Handset
key)
Now "Monitor" should appear at the
bottom of the Network Options menu.
Pressing the right Display Button when in
monitor mode will show a list of the six
cells with the strongest signals.
Test Mode Indicators: (* = only available
when call in progress )
--------------------
CH Channel Number
RX Signal Strength (dB)
N NCC (Color Code)
B BCC (Color Code)
CI Cell ID (in Hex)
C1+ how long before phone does forced
hand over. (see RX and RXAM)
LAI Location Area Identity. Display Network
ID code (42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Reeceive signal strength cut-off
point
TS* Time Slot Number
TA* Timing Advance. Distance from tower
in Km X 2
PL* Power Level


This page:




Help/FAQ | Terms | Imprint
Home People Pictures Videos Sites Blogs Chat
Top
.